综述了近年来我国丙烯酸酯乳液胶粘剂的最新研究现状，并介绍了丙烯酸酯乳液胶粘剂在压敏胶及包装材料中的应用，指出了我国丙烯酸酯乳液胶粘剂的发展方向。

The latest research situation of polyacrylate emulsion adhesives was reviewd and the application of polyacrylate emulsion adhesives in the pressure sensitive adhesives and the packaging materials was described. Finally the development trend of polyacrylate emulsion adhesives was prospected.

二代丙烯酸酯结构胶具有诸多优异的性能,但是耐水性、耐热性依然存在不足。本文使用丙烯酸酯橡胶、MBS树脂、自制离子促进剂、复配阻聚剂、巯基偶联剂以及三环癸烷二甲醇二丙烯酸酯等制备出固化平稳、胶层柔韧、耐水耐热性能良好的二代丙烯酸酯结构胶。该结构胶固化放热平稳,本体断裂伸长率可达50%。

The second generation acrylic structural adhesive has many excellent properties,but it still has some deficiencies in water resistance and heat resistance.In this paper,a second generation acrylic structural adhesive with smoothly curability,the cured film of which has good flexibility and resistances to heat and water,was prepared with the acrylic rubber,MBS resin,a self-made ion promoter,the compounded inhibitor,the thiol coupling agent and tricyclodecane dimethylol diacrylate.The heat release of curing of the structural adhesive is smooth and the cured has a bulk enlongation at break of 50%..

介绍了目前丙烯酸酯系列粘合剂的缺点，阐述了如何根据“粒子设计”理论设计满足涂料印花要求的核壳型丙烯酸酯系列粘合剂。综述了单体选择、核壳乳液聚合原理、核壳乳液聚合工艺及表征，展望了核壳型丙烯酸酯类粘合剂的发展趋势。

Defects of acrylate series adhesive were introduced, and methods to design core-shell acrylate series adhesive that suitable for pigment printing according to“particle design”theory were discussed. Monomer choosing, core-shell emulsion polymerization principle, core-shell emulsion polymerization process and characteristic were reviewed, and development tendency of core-shell acrylate series adhesive was prospected.

介绍了一种气雾剂型水性丙烯酸酯涂料的制备方法。以自制的环氧改性水性丙烯酸树脂为基料,制备了气雾剂型水性丙烯酸酯涂料。研究了硬、软单体配比对漆膜性能的影响,以及水性丙烯酸酯涂料基料与二甲醚抛射剂配比对气雾剂涂料样品施工性能的影响,检测了制备的涂料的性能。实验发现,当硬/软单体配比为36/31（质量分数,%）,水性丙烯酸酯涂料基料与二甲醚抛射剂配比为220/80（g）时,制备的气雾剂型水性丙烯酸酯涂料具有最佳的综合性能。

A kind of preparation method of aerosol water-based acrylic coatings was introduced. Self-made epoxy modified water-based acrylic resin was used as basic material;the aerosol water-based acrylic coatings were prepared. The effect of hard/soft monomer ratio on the film performance was studied as well as the effect of basic material/dimethyl ether ratio on the construction performance of the coatings, the performance of prepared coatings was tested. The results show that when the hard/soft monomer ratio is 36:31(mass fraction),and the water-based acrylate coatings/dimethyl ether ratio is 220/80(g), the comprehensive performance of prepared aerosol water-based acrylic coatings is the best.

概述紫外光的固化原理与水性聚氨酯丙烯酸酯涂料的性能,综述UV固化水性聚氨酯丙烯酸酯涂料氟、有机硅、环氧树脂及超支化等改性的最新研究进展,展望应用前景与发展趋势。

Ultraviolet (UV)curable waterborne polyurethane-acrylate is a kind of functional environmental protec-tion coatings.The UV curing technology and waterborne polyurethane-acrylate coatings are introduced.The modifi-cation of UV-curable waterborne polyurethane-acrylate coating is reviewed,and its application prospect and devel-opment trend are prospected.